How to Apply and Care for Car Door Magnets
Apply a car magnet only to clean, dry, flat magnetic steel, with every edge making contact. Remove it at least weekly to clean and dry both surfaces, and take it off before automatic car washes. Bannerology magnets are 12 x 18 in, full color on one side, with 30 mil magnetic stock, UV coating and rounded corners. Care still matters even with a protective coating.
Updated
At a glance
12 x 18 in, 30 mil, full color one side, UV coated and rounded corners. From $27.99 each, $23.99 each at 10. Car magnets: Prints in 4 business days, then ships. Shipping is $14.95 on orders under $125. Orders of $125 or more ship free. Items of different types or sizes print and ship separately, $7.95 for each additional shipment. Alaska and Hawaii freight is quoted individually.
Questions? Call (888) 217-9558, answered 24/7.
Download the templateAll artwork templates

Prepare both surfaces
Wash the intended panel and remove dirt, grit and residue before application. Clean the back of the magnet too, because debris trapped behind it can scratch paint or prevent full contact. Let both surfaces dry completely. Check that the panel is magnetic steel with a kitchen magnet, and look for body creases, trim or curves that could lift an edge. A clean panel that is curved or aluminum is still unsuitable. Do not place the magnet over another graphic, a damaged area or an uneven repair.
Apply from one edge
Position one edge against the panel, then gently lay the rest flat without trapping dirt or forcing it across a crease. Inspect every corner and the full perimeter. Rounded corners are standard on Bannerology magnets, but they still need contact with the steel beneath them. If you need to reposition the magnet, lift it and start again instead of dragging it across the paint. Do not sharply bend, fold or tightly roll the material. If it cannot lie completely flat, remove it and use another suitable location.
Remove and clean at least weekly
At least once a week, remove the magnet and wipe the vehicle panel and the magnet back. Let both dry before reapplying. This reduces trapped moisture and dirt lines, and gives you a chance to inspect the paint and magnet edges. In wet or dirty conditions, check more often. Long periods of coverage can contribute to uneven paint fading because the covered area receives different sunlight. Regular removal helps with inspection but does not guarantee identical fading. Stop using a magnet if the panel develops marks that cleaning does not resolve.
Car washes and cold weather
Remove magnets before automatic car washes so brushes and strong water pressure cannot catch their edges. Clean and dry the magnet before putting it back on the vehicle. Remove it in freezing weather rather than leaving moisture trapped behind it. Temperature changes can affect flexibility and surface contact. Do not use hot tools to force a stiff or curled magnet into shape. If a magnet slides, lifts or no longer sits flat, take it off immediately and inspect the contact surfaces. Never continue driving with an edge visibly raised.
Store flat, not folded
Store the magnet flat on a clean surface, or against a suitable clean steel surface where the whole piece is supported. Keep the printed face protected from scratches and avoid placing heavy objects on top. Folding can permanently damage the material; tight rolling can encourage curled edges. Keep magnets out of places where tools, grit or sharp objects may rub against them. Before returning a stored magnet to service, inspect the back, corners and printed face. Clean it again if necessary. A stored magnet should be completely flat before it goes on a moving vehicle.
New paint and expected life
For repainted or body filled panels, wait at least 60 to 90 days and follow the paint professional or vehicle manufacturer guidance. Some finishes need more time, and body filler can also reduce magnetic contact. A new vehicle is not automatically suitable if its intended panel is aluminum or has a coating that requires special care. UV coating helps protect the print face, but sunlight, heat, dirt and handling still affect service life. Replace a magnet when the message is faded, the surface is damaged or the edges no longer make complete contact.
Current prices, artwork and ordering
From $27.99 each, $23.99 each at 10. Prices come from the live product table; the highest eligible quantity tier applies. Review size and quantity on the product page and attach finished artwork before adding it to the cart. A matching pair requires two pieces.
Standard production is 4 business days, then the order ships. Next business day production is available for $2.99 per magnet. These are production schedules, not delivery promises. Carrier transit follows printing, and weekends and our production holidays (New Year's Day, Memorial Day, Independence Day, Labor Day, Thanksgiving and the day after, Christmas Day) are not business days. Shipping is $14.95 on orders under $125. Orders of $125 or more ship free. Items of different types or sizes print and ship separately, $7.95 for each additional shipment. Alaska and Hawaii freight is quoted individually.
Supply PDF, PNG or JPG at 100 dpi at full size, with 0.125 in bleed on every edge and text 0.5 in inside the trim. A 12 x 18 in finished piece needs an 18.25 x 12.25 in artwork area when laid out horizontally. Keep important information away from the trim and inspect the final file before uploading. For order or artwork questions, call (888) 217-9558. The phone line is answered 24/7.
Questions
Why did my magnet leave a mark?
Trapped dirt, moisture or uneven sun exposure may be responsible. Remove it and inspect the paint before using it again.
Can I leave it on all the time?
No. Remove at least weekly for cleaning and inspection, and more often in wet or dirty conditions.
How do I clean it?
Use a gentle wipe and suitable mild cleaner, then let both the magnet and panel dry fully.
It slid off. What should I check?
Check panel material, flatness, dirt, moisture and curled edges. Do not reuse it until it lies fully flat.
Is it safe on a new car?
Check the vehicle finish and panel material. Follow manufacturer advice and extra curing guidance for fresh paint.
Does UV coating remove the need for care?
No. It protects the print face, but regular removal and clean, dry contact are still necessary.
