How to Hang a Rider Sign on a Real Estate Post or Frame
Hang a rider from two secure attachment points, keep it level and leave clearance around the main listing sign. Bannerology includes rider pins with both rider sizes, but the correct installation depends on your post or frame. Inspect the hardware and property conditions before starting. A well mounted rider adds a short message without blocking the larger panel or turning in ordinary wind.
Updated
At a glance
6 x 24 in PVC or 4 x 24 in coroplast; both double sided with rider pins included. From $8.99 each, $6.99 each at 10. 6 x 24 in riders: Prints in 4 business days, then ships. Shipping is $14.95 on orders under $125. Orders of $125 or more ship free. Items of different types or sizes print and ship separately, $7.95 for each additional shipment. Alaska and Hawaii freight is quoted individually.
Questions? Call (888) 217-9558, answered 24/7.
Download the templateAll artwork templates

Inspect the installation first
Look at the post arm, main panel and any existing rider hooks before opening the new rider. Check whether the arm has matching holes and whether the frame was designed to hold an extra panel. Measure the gap below the arm and above the main sign. Avoid mounting to cracked plastic, a loose post or bent frame hardware. A new rider cannot make an unstable installation safe. Confirm that you have permission to use the post and that the complete display follows the property owner and local placement rules.
Use pins where the hardware matches
Rider pins pass through the intended attachment holes in the rider and the post arm or compatible hardware. Both Bannerology rider sizes include pins. Use two attachment points when the installation supports them so the rider stays level instead of swinging around one point. Check that each connection is seated and that there are no sharp ends where someone may reach. Hardware layouts vary, so do not force a pin into a hole that does not fit. Keep unused pins with spare riders rather than leaving them loose on the ground.
Frames without matching holes
Some metal frames use rider hooks rather than holes in a post arm. Compatible S hooks or suitable zip ties can connect the panel to existing attachment points when the frame allows it. These alternative attachments are not included with the rider. Check their fit, strength and outdoor suitability, and use them without crushing the panel. If the frame has no safe attachment points, ask the frame supplier for the intended mounting method. Do not drill a structural part or improvise a weak connection simply because the panel appears light.
Above or below the main panel
A rider can hang below a post arm or sit at the top of a metal frame designed for riders. Keep it clear of the main sign so the two panels do not rub or overlap. Check the display from both directions, not just from the sidewalk directly in front of it. The message should be visible without covering the brokerage name, contact details or required disclosures. If you hang two riders, allow a separate gap for each. A slimmer 4 x 24 in panel can help where vertical clearance is limited.
Wind and regular inspection
Rigid PVC holds a flat face better than a lighter fluted panel during ordinary listing use. The 6 x 24 in rider uses 3 mm rigid white PVC, while the 4 x 24 in rider uses 4 mm white coroplast. Coroplast can bow in strong wind, especially if it hangs from one point. Neither material eliminates the need for secure attachments. After windy weather, check that the rider is still level and that its holes and hardware are intact. Remove a damaged panel rather than leaving it loose or difficult to read.
Change status and store for reuse
Replace the rider as soon as the property status changes so the display remains accurate. Support the panel while releasing the attachments instead of pulling against the holes. Wipe off dirt gently, let the rider dry and store it flat where it cannot be scratched or bent. Keep pins or clips in a labeled container nearby. Separate reusable messages from property specific panels. Before the next installation, check both faces and the mounting points. A clean, intact rider is easier to reuse than a panel left outdoors or compressed under heavy equipment.
Current prices, artwork and ordering
From $8.99 each, $6.99 each at 10. Prices come from the live product table; the highest eligible quantity tier applies. Review size and quantity on the product page and attach finished artwork before adding it to the cart. Riders include pins, not a post or frame.
6 x 24 in riders: Prints in 4 business days, then ships. 4 x 24 in riders: Paid print ready orders by 10:30am PT print the same business day, otherwise next business day. These are production schedules, not delivery promises. Carrier transit follows printing, and weekends and our production holidays (New Year's Day, Memorial Day, Independence Day, Labor Day, Thanksgiving and the day after, Christmas Day) are not business days. Shipping is $14.95 on orders under $125. Orders of $125 or more ship free. Items of different types or sizes print and ship separately, $7.95 for each additional shipment. Alaska and Hawaii freight is quoted individually.
Supply PDF, PNG or JPG at 100 dpi at full size, with 0.125 in bleed on every edge and text 0.5 in inside the trim. Use 24.25 x 6.25 in for a 6 x 24 rider or 24.25 x 4.25 in for a 4 x 24 rider. Keep important information away from the trim and inspect the final file before uploading. For order or artwork questions, call (888) 217-9558. The phone line is answered 24/7.
Questions
What are rider pins?
They are small attachment pieces used with compatible rider and post holes. Both Bannerology rider sizes include them.
My post has no holes. What should I do?
Check for compatible hooks or ask the frame supplier about its mounting method. Alternative hardware is not included.
Can riders go on a yard sign frame?
Yes, when the frame is designed to support a rider and provides secure attachment points.
How do I keep a rider from spinning?
Use two secure points, keep the panel level and avoid a single loose connection in an exposed position.
How do I store riders?
Clean and dry them, then store flat with the attachment hardware kept together.
Should I remove a damaged rider?
Yes. Replace cracked, loose or badly bowed panels before they become unsafe or misleading.
